Category Archives: Controllers
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
Motion Control – Multi-axis Motion Controllers
Van Nuys, CA – Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!
Motion Control – Miniature Stepper Motor Stage
Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
The Motion Control – Z-axis Stages
Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!
Motion Control – Linear Actuator
Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators.
This clean, compact, motion control voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
Motion Control – Push Type Open Frame Solenoid
Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost motion control S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.
Motion Control – Miniature Hollow Core Voice Coil Servo Motor Is Only 0.625 in. in Diameter!
Motion Control – Miniature Linear Voice Coil Motor
Van Nuys, CA – Motion Control – The HVCM-016-013-003-01 Hollow Core Voice Coil Motor, features an open aperture and high force-to-size ratio. This motion control miniature Linear DC Servo Motor from Moticont has a continuous force rating of 5.7 oz. (1.6 N) and a peak force of 17.9 oz (5.0 N) at a 10% duty cycle. Clean and quiet, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.
The HVCM-016-013-003-01 Hollow Core Voice Coil Linear Servo Motor has a 0.125 in. (3.2 mm) diameter open aperture for optics, illumination, laser beams, or cable passage.
Motion Control – Linear Servo Controller for Non-Commutated Motor from Equipment Solutions!
Motion Control – Linear Servo Controller
Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.
This motion control card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.
Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions
Motion Control – Miniature Rotational Voice Coil Stage
Forestville, CA, – Motion Control – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Motion Control – Stepper Motor Motion Control Systems
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
