Category Archives: OES (Optimal Engineering Systems)
Motion Control – Video – Dual-axis Yaw Pitch Stages Enable High Precision Measurements of Curves and Angles!
Motion Control – Video – Dual-axis Yaw Pitch Stage
Motion Control Stages – Dual Axis Yaw Pitch Stage
To View the Motion Control Video Click “HERE”
Motion Control – Video – The integration of high precision Rotary and Goniometer Stages creates platforms for the precise measurement of curves and angles. The YP100-45 Series (-01 thru -04) of Dual-axis Stages has been released by Optimal Engineering Systems, Inc. (OES). These compact, Yaw Pitch Stages features high precision rotary stages capable of 360 degrees of continuous rotation (clockwise/counterclockwise) and goniometers with +/45 degrees of travel. The table of the goniometer (upper) measures 104 mm x 90 mm with a precision pattern of threaded holes for tooling and fixtures. The YP100-45 Series Dual-axis stages are on a mounting plate for easy integration into new and existing applications.
Motion Control – Electroless Nickel Plated Stainless Steel, 0.5 Micron Resolution Linear Positioning Stages Offer a NEW Level of Cleanness!
Motion Control – Electroless Nickel Plated Linear Stages
Motion Control – Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has added two Stainless Steel Electroless Nickel plated Linear Single-axis Stages to their extensive line of high resolution stages. The AX40-F1VR-ND and the AX40-F1VL-ND Linear (X-axis) Stages have a 40 mm (1.575 in.) by 40 mm (1.575 in.) table and a stroke length of 15 mm (0.590 in.).
Motion Control – Video – 3-axis High Precision XZG Stages from Optimal Engineering Systems!
Motion Control – Video – XZG-axis Stages
Motion Control Stages – XZG-axis Stages
To View the Motion Control Video Click “HERE”
Motion Control – Video – An extensive series of XZG Motion Control Positioning Stages (X-axis, Z-axis, and Goniometer-axis) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, one of two goniometers with +/-10 degrees or +/-15, degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.
Motion Control – Three-Axis Yaw, Pitch, and Roll Positioning Stages Feature Four Motor Options!
Motion Control – Yaw Pitch and Roll Stage
Van Nuys, CA – Motion Control – New compact three-axis, Yaw, Pitch, and Roll Stages from OES (Optimal Engineering Systems, Inc.) feature four motor options to meet the precision and speed of travel requirements of an application.
Motion Control – High Precision, Low Profile, Compact 40 mm Motorized Rotary Stages!
Motion Control – 40 mm Diameter Rotary Stage!
Van Nuys, CA – Motion Control – The AY110-40-01 Rotary Stage (pictured) from Optimal Engineering Systems, Inc. (OES) offers the users a high precision, low profile, compact motorized rotary stage. This precision stage with a diameter of 40 mm (1.575 in.) table is just 30 mm (1.181 in.) high and the footprint is only 133 mm by 57.5 mm (5.236 in. by 2.264 in.).
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
Motion Control – Multi-axis Motion Controllers
Van Nuys, CA – Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
The Motion Control – Z-axis Stages
Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!
Motion Control – Linear Actuator
Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators.
This clean, compact, motion control voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
Motion Control – Push Type Open Frame Solenoid
Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost motion control S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.
