XYZ-Theta - Page 9 of 15 - Motion in XYZ & Theta

Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!

September 12th, 2024

Editor-Publisher

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.

Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning. Read more »

Motion Control – Electromate Partners with Spin Robotics to Offer Cobot Screwdriving Solutions in Canada

August 29th, 2024

Editor-Publisher

Motion Control – Cobot Screw Driving Solutions

Motion Control – Vaughan, Ontario, Canada — — Electromate Inc., a leading distributor of industrial automation products, motion control systems and robots has announced a new partnership with Spin Robotics, a Danish manufacturer of collaborative robot (cobot) accessories. The partnership will bring Spin Robotics’ screwdriving solutions to the Canadian market, providing customers with efficient and reliable cobot solutions for screwdriving applications. Read more »

Motion Control – Recognizing That Sometimes the Best Bearing for the Job is a Plain Bearing!

August 15th, 2024

Editor-Publisher

Motion Control – Linear Plain Bearings

Read more »

Motion Control – Linear Servo Controller for Non-Commutated Motor from Equipment Solutions!

August 8th, 2024

Editor-Publisher

Motion Control – Linear Servo Controller

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

This motion control card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils. Read more »

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

August 1st, 2024

Editor-Publisher

Motion Control – Miniature Rotational Voice Coil Stage

Forestville, CA, – Motion Control – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

Read more »

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

July 25th, 2024

Editor-Publisher

Motion Control – Stepper Motor Motion Control Systems

Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems. Read more »

Motion Control – Kollmorgen expands AKD2G versatility with the launch of new synchronized communication protocols

July 11th, 2024

Editor-Publisher

Motion Control – Kollmorgen Servo Drives

Motion Control – Vaughan, Ontario, Canada – Kollmorgen, a global leader in motion control systems, today announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen®*, EtherCAT®*, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations. Read more »

Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

July 5th, 2024

Editor-Publisher

Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages

Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.

Watch on YouTube– https://youtu.be/2ymH0TjI3Vc Read more »

Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!

June 27th, 2024

Editor-Publisher

Motion Control – ZGG Stage – Lift Plus Dual Goniometers

Motion Control – Van Nuys, CA – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.

See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA

Read more »

Motion Control – More Advantages With Temposonics R-Series V Profinet

June 20th, 2024

Editor-Publisher

Motion Control – Linear Sensors

Vaughan, Ontario, Canada — Motion Control – Temposonics, the industry leader in magnetostrictive linear sensor technology, has announced a new generation of sensors focused on Industry 4.0, which features advanced machine monitoring and predictive maintenance capabilities to enhance industrial productivity. Read more »