Motion Control – The #1 Choice for X-axis Linear Motion CNC Plasma Cutter Tables
June 12th, 2024 
Editor-PublisherMotion Control – Roller Blocks
Motion Control – High Force and High Precision with Moticont’s GVCM Series Linear Servo Motor!
May 30th, 2024 Editor-PublisherMotion Control – Voice Coil Motors!
Motion Control – Van Nuys, CA – Linear Motion Actuator – The GVCM-095-064-01 Linear Servo Actuator from Moticont combines high precision and high force in an easily integrated package. This linear voice coil servo actuator, also called a moving coil motor, features: Zero cogging, high speed, high acceleration/deceleration, and high precision accuracy and repeatability when operated in a closed servo loop.
The precision ground 0.1572 +/- 0.0003 in. (3.993 +/- 0.008 mm) diameter shaft guided by a linear bearing in the extended position is 2.500 in. (63.5 mm) long. It can tolerate a side load to 2 lbs. (9.0 N), and has 1.500 inches (38.1 mm) of travel with a high-force-to-size ratio of 24.4 lbs. (108.6 N) of continuous force and 77.1 lbs. (343 N) of peak force at a 10% duty cycle. The shaft has a 4-40 UNC 2B x 0.38 deep thread for backlash free connection to a load. Read more »
Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages
May 16th, 2024 Editor-PublisherMotion Control – Precision Linear Stage
Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.
See the YouTube Video: https://youtu.be/qRsjeChhEWo Read more »
Motion Control – Companies on Facebook
May 9th, 2024 Editor-PublisherMotion Control – Facebook Pages – Companies
MotionShop.com invites you to check out these Company Facebook pages …
Motion Control – Application – CERAMICSPEED Hybrid Bearings Provide 8 Times Longer Life for Canner!
April 18th, 2024 Editor-PublisherMotion Control – Hybrid Ceramic Bearings Application
E. Longmeadow, MA –Motion Control – CERAMICSPEED Hybrid Radial Bearings are designed for environments of high humidity, have been approved in accordance with FDA 21 CFR (Code of Federal Regulation covering medicine and food), and have an EC No. 1935/2004 authorization. Superior life and performance when compared to bearings made from just stainless steel, these Bearings feature very smooth ceramic balls that will not deform or spall under high loads, and synthetic material ball cages. Read more »
Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!
April 11th, 2024 Editor-PublisherMotion Control – Electric Cylinder
Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.
This new SDLM-038-070-01-01M Linear DC Actuator features high repeatability, 1.25 micron resolution, a continuous force of 14.5 N (3.2 lbs.), and a peak force of 45.8 N (10.3 lbs.). To operate at peak efficiency an integral temperature sensor provides data to achieve the highest possible throughput. Read more »
Motion Control – Electric Cylinder Has Zero Cogging and High Throughput!
April 4th, 2024 Editor-PublisherMotion Control – Zero Cogging Electric Cylinder
Van Nuys, CA – Motion Control – Components -– Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators. This new DDLM-019-070-01 Linear Actuator can develop 10.1 oz (2.8 N) of continuous force and 32.1 oz (8.9 N) of peak force at 10% duty cycle. Having a stroke of 0.960 in. (24.4 mm), this clean, fully enclosed linear actuator, also referred to as an electric cylinder is ideal for use in critical medical applications. Read more »
Motion Control in XYZ and Theta- High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!
March 28th, 2024 Editor-PublisherMotion Control in XYZ and Theta – Linear Focus Actuator
Forestville, CA, – — Motion Control in XYZ and Theta – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.
Read more »
Motion Control in XYZ and Theta – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
March 21st, 2024 Editor-PublisherMotion Control in XYZ and Theta – Multi-axis Motion Controllers
Motion Control XYZ and Theta – Van Nuys, CA – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system. Read more »
Motion Control in XYZ and Theta – Introducing the New VLM-60 Multi-turn Encoder from Netzer Precision
March 14th, 2024 Editor-PublisherMotion Control in XYZ and Theta – Multi-turn Encoder
Vaughan, Ontario, Canada — Motion Control in XYZ and Theta – Netzer is proud to introduce the new VLM-60 multi-turn, hollow shaft absolute rotary encoder, the ideal solution for smooth and continuous production with limited space. Read more »
