Category Archives: Controllers
Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
Motion Control – Tubular Solenoids
Motion Control – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter motion control solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
These miniature motion control solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.
Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
Motion Control – ZGG Stage – Lift Plus Dual Goniometers
Motion Control – Van Nuys, CA – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA
Motion Control – High Force and High Precision with Moticont’s GVCM Series Linear Servo Motor!
Motion Control – Voice Coil Motors!
Motion Control – Van Nuys, CA – Linear Motion Actuator – The GVCM-095-064-01 Linear Servo Actuator from Moticont combines high precision and high force in an easily integrated package. This linear voice coil servo actuator, also called a moving coil motor, features: Zero cogging, high speed, high acceleration/deceleration, and high precision accuracy and repeatability when operated in a closed servo loop.
The precision ground 0.1572 +/- 0.0003 in. (3.993 +/- 0.008 mm) diameter shaft guided by a linear bearing in the extended position is 2.500 in. (63.5 mm) long. It can tolerate a side load to 2 lbs. (9.0 N), and has 1.500 inches (38.1 mm) of travel with a high-force-to-size ratio of 24.4 lbs. (108.6 N) of continuous force and 77.1 lbs. (343 N) of peak force at a 10% duty cycle. The shaft has a 4-40 UNC 2B x 0.38 deep thread for backlash free connection to a load.
Motion Control – Measure Very Small Angular Displacements Of Very Small Parts With Low Cost Digital Autocollimator
Motion Control – Miniature Autocollimator
Forestville, CA, Motion Control — The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages
Motion Control – Precision Linear Stage
Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.
See the YouTube Video: https://youtu.be/qRsjeChhEWo
Motion Control – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!
Motion Control – Electric Cylinder
Van Nuys, CA – Motion Control – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.
This new SDLM-038-070-01-01M Linear DC Actuator features high repeatability, 1.25 micron resolution, a continuous force of 14.5 N (3.2 lbs.), and a peak force of 45.8 N (10.3 lbs.). To operate at peak efficiency an integral temperature sensor provides data to achieve the highest possible throughput.
Motion Control – Electric Cylinder Has Zero Cogging and High Throughput!
Motion Control – Zero Cogging Electric Cylinder
Van Nuys, CA – Motion Control – Components -– Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators. This new DDLM-019-070-01 Linear Actuator can develop 10.1 oz (2.8 N) of continuous force and 32.1 oz (8.9 N) of peak force at 10% duty cycle. Having a stroke of 0.960 in. (24.4 mm), this clean, fully enclosed linear actuator, also referred to as an electric cylinder is ideal for use in critical medical applications.
Motion Control in XYZ and Theta- High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!
Motion Control in XYZ and Theta – Linear Focus Actuator
Forestville, CA, – — Motion Control in XYZ and Theta – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.
Motion Control in XYZ and Theta – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
Motion Control in XYZ and Theta – Multi-axis Motion Controllers
Motion Control XYZ and Theta – Van Nuys, CA – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
