Category Archives: Vertical Lift
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Motion Control – Stepper Motor Motion Control Systems
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
Motion Control – ZGG Stage – Lift Plus Dual Goniometers
Motion Control – Van Nuys, CA – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA
Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages
Motion Control – Precision Linear Stage
Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.
See the YouTube Video: https://youtu.be/qRsjeChhEWo
Innovations in Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!
Innovations in Motion Control –
XY-Theta Alignment Stages!
Van Nuys, CA – — Innovations in Motion Control Technology – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options
Motion Control – Solenoid Drivers
Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). This new series of Three Axis Gimbal Mounts are 588 mm wide by 463 mm high, and handle loads up to 10 kg. The AU400-AER (Azimuth, Elevation, and Roll) Series of Three Axis Gimbal Mounts feature high precision 180:1 worm gear driven “V” groove rotary stages.
Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!
Motion Control – Long Travel Linear Stages
Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.
Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!
Motion Control – Three-Axis Stage!
Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems. These new, larger, high stability, gimbal mounts are 400 mm wide x 480 mm high, weigh 50 kg and handle loads up to 10 kg and the Roll Axis features a large 90 mm thru hole for cables and optics.
Motion Control – High Precision, High Load Goniometer Stages with +/- 30 Degrees of Travel Are Available from OES!
XYZ-G Positioning Stage – XYZ-Goniometer Positioning Stages
Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees of travel with 30 kg of load.
