Category Archives: Tubular – Push Type
Motion Control – Select the Low Cost, Economical, Pull-type Latching Solenoid Best Suited for Your Application!
Motion Control – Latching Solenoids
Motion Control – Van Nuys, CA –A Series of Latching Pull-type Motion Control Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The compact S-18-100T Pull-type Latching Solenoids are: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 0.313 in diameter plunger.
Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!
Motion Control – Push Type Solenoids
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.
Motion Control – Maxon Adds Dynamism to Robotic Servo Motors
Motion Control – Motors and Gearheads
Motion – Advanced Compact Motors and Gearheads for High-Performance Robotics
Motion Control – Vaughan, Ontario, Canada -Electromate, Canada’s premier distributor of motion control solutions, is proud to announce the release of maxon’s EC Frameless DT50 Motor and ECX Flat Series DC Motors and Gearheads, designed to meet the demands of modern robotics and automation systems. The Motion Control EC and ECX Series motors and gearheads offer compact, efficient drive systems with exceptional torque and power density, making them ideal for applications requiring precise motion control.
Motion Control – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!
Motion Control – Rotary Solenoids
Motion Control – Van Nuys, CA – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
These compact 38.1 mm (1.50 in.) diameter motion control solenoids are just 22.1 mm (0.87 in.) long and have two M4X0.7 threaded studs (8-32 studs optional) 7.4 mm (0.29 in.) long on a 22.2 mm (0.875 in.) bolt circle. The reverse shaft has 40 degrees of clockwise rotation, extending 13.0 mm (0.51 in.). Shaft end is serrated for better grip of the attached load.
Motion Control – Select from a Series of Compact Electromagnets to Meet Holding Force and Duty Cycle Requirements of an Application!
Motion Control – Electromagnets
Motion Control – Van Nuys, CA – A powerful series of compact, low cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and holding force requirements of the application. E-22-150 Electromagnets are immediately available off-the-shelf in sample quantities and OEM quantities for Just-In-Time deliveries.
Depending on the application, duty cycle, and required force, the electromagnets in this series can supply 54 to 83 lbs. of holding force for duty cycles ranging from 100% (continuously on) to 10%.
Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!
Motion Control – Push Type Open Frame Solenoid
Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost motion control S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.
Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
Motion Control – Tubular Solenoids
Motion Control – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter motion control solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
These miniature motion control solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.
