Category Archives: Multi-axis
Motion Control – High Precision, Low Profile, Compact 40 mm Motorized Rotary Stages!
Motion Control – 40 mm Diameter Rotary Stage!
Van Nuys, CA – Motion Control – The AY110-40-01 Rotary Stage (pictured) from Optimal Engineering Systems, Inc. (OES) offers the users a high precision, low profile, compact motorized rotary stage. This precision stage with a diameter of 40 mm (1.575 in.) table is just 30 mm (1.181 in.) high and the footprint is only 133 mm by 57.5 mm (5.236 in. by 2.264 in.).
Motion Control – New! Compact Linear Voice Coil Servo Motor with Built-in Shaft and Bearing Features: Zero Cogging, High Force-to-Size Ratio, and 0.500 in. Stroke!
Motion Control – Compact Miniature Voice Coil Motor!
Van Nuys, CA – Motion Control – The GVCM-032-025-02M Linear Voice Coil Servo Motor, is the first of a new series, released by Moticont. This 12.7 mm (0.500 in.) stroke compact linear servo motor with built-in shaft and bearing is just 31.8 mm (1.250 in.) in diameter.
Motion Control – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!
Motion Control – Multi-axis Motion Controllers
Van Nuys, CA – Motion Control – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!
The Motion Control – Z-axis Stages
Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!
Motion Control – Linear Actuator
Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators.
This clean, compact, motion control voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Miniature Hollow Core Voice Coil Servo Motor Is Only 0.625 in. in Diameter!
Motion Control – Miniature Linear Voice Coil Motor
Van Nuys, CA – Motion Control – The HVCM-016-013-003-01 Hollow Core Voice Coil Motor, features an open aperture and high force-to-size ratio. This motion control miniature Linear DC Servo Motor from Moticont has a continuous force rating of 5.7 oz. (1.6 N) and a peak force of 17.9 oz (5.0 N) at a 10% duty cycle. Clean and quiet, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.
The HVCM-016-013-003-01 Hollow Core Voice Coil Linear Servo Motor has a 0.125 in. (3.2 mm) diameter open aperture for optics, illumination, laser beams, or cable passage.
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Motion Control – Stepper Motor Motion Control Systems
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
Motion Control – ZGG Stage – Lift Plus Dual Goniometers
Motion Control – Van Nuys, CA – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
