Category Archives: Facebook Pages –
Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!
Motion Control – Linear Actuator
Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators.
This clean, compact, motion control voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.
Motion Control – Hybrid Linear Bearings for the Times Bearing Failure Just Can Not be Allowed to Happen!
Motion Control – Ceramic Hybrid Linear Bearings
E. Longmeadow, MA – Motion Control – Linear Motion – Pegasus Hybrid Linear Bearings for the times Bearing Failure just can not be allowed to Happen! That is the the time when Down-Time is more costly then the price of the bearings.
Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!
Motion Control – Yaw and Pitch Stages
Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.
Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.
Motion Control – Miniature Hollow Core Voice Coil Servo Motor Is Only 0.625 in. in Diameter!
Motion Control – Miniature Linear Voice Coil Motor
Van Nuys, CA – Motion Control – The HVCM-016-013-003-01 Hollow Core Voice Coil Motor, features an open aperture and high force-to-size ratio. This motion control miniature Linear DC Servo Motor from Moticont has a continuous force rating of 5.7 oz. (1.6 N) and a peak force of 17.9 oz (5.0 N) at a 10% duty cycle. Clean and quiet, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration, deceleration and high speed.
The HVCM-016-013-003-01 Hollow Core Voice Coil Linear Servo Motor has a 0.125 in. (3.2 mm) diameter open aperture for optics, illumination, laser beams, or cable passage.
Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!
Motion Control – Stepper Motor Motion Control Systems
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.
Motion Control – Kollmorgen expands AKD2G versatility with the launch of new synchronized communication protocols
Motion Control – Kollmorgen Servo Drives
Motion Control – Vaughan, Ontario, Canada – Kollmorgen, a global leader in motion control systems, today announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen®*, EtherCAT®*, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations.
The Motion Control AKD2G servo drive update allows for synchronized motion between multiple drives using a wide variety of control architectures. Thanks to its flexibility and high performance, AKD2G is the ideal drive for use in applications that require highly precise coordination across multiple axes of motion.
The drive features industry-leading power density in a compact package and is easy to mount — with one- and two-axis variants available. Engineers can leverage single-cable Smart Feedback Device (SFD) or HIPERFACE®* DSL connections, or choose from a wide range of other feedback devices.
Finally, the drive features an optional SafeMotion®™ Monitor (SMM) firmware with a safety level of SIL3/PLe to meet functional safety needs and enable a wider range of applications.
The Motion Control AKD2G paired with AKM2G motors is part of the 2G Motion System, a suite of motion products designed to work together for ultimate ease of setup and higher performance.
Engineers also can take advantage of the drive’s compatibility with a wider range of controllers and feedback devices — or with other motors, as needed.
For more information, visit https://www.electromate.com/akd2g-series-servo-drive/
About Electromate:
Electromate specializes in robotic, mechatronic, and motion control solutions. We focus on high-performance and precision applications for the industrial automation sector.
Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology.
They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-time delivery, dedicated customer service and technical engineering support.
About Electromate: Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated motion control automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.
More on Electromate can be found at
Website: http://www.electromate.com
LinkedIn: https://www.linkedin.com/company-beta/209277/
Twitter: https://twitter.com/Electromate
Facebook: https://www.facebook.com/electromateindustrial/
Blog: https://electromate.wordpress.com/
For more information on the “Innovation and Technology Award”
For more information on the “2021 Excellence Award”
For more information on the 2024 “Best Place to Work” CLICK HERE!
For more information on the “AHTD Award” CLICK HERE!
To view Electromate’s new corporate video CLICK HERE
For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com
See this and other Motion Control Components from Electromate featured on:
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
http://MotionControlMarketing.com
Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!
Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages
Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.
Watch on YouTube– https://youtu.be/2ymH0TjI3Vc
Motion Control – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!
Motion Control – ZGG Stage – Lift Plus Dual Goniometers
Motion Control – Van Nuys, CA – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
See the ZGG Stage in Action Click on the Youtube Link – https://youtu.be/I7YQ3LycIwA
Motion Control – High Force and High Precision with Moticont’s GVCM Series Linear Servo Motor!
Motion Control – Voice Coil Motors!
Motion Control – Van Nuys, CA – Linear Motion Actuator – The GVCM-095-064-01 Linear Servo Actuator from Moticont combines high precision and high force in an easily integrated package. This linear voice coil servo actuator, also called a moving coil motor, features: Zero cogging, high speed, high acceleration/deceleration, and high precision accuracy and repeatability when operated in a closed servo loop.
The precision ground 0.1572 +/- 0.0003 in. (3.993 +/- 0.008 mm) diameter shaft guided by a linear bearing in the extended position is 2.500 in. (63.5 mm) long. It can tolerate a side load to 2 lbs. (9.0 N), and has 1.500 inches (38.1 mm) of travel with a high-force-to-size ratio of 24.4 lbs. (108.6 N) of continuous force and 77.1 lbs. (343 N) of peak force at a 10% duty cycle. The shaft has a 4-40 UNC 2B x 0.38 deep thread for backlash free connection to a load.
Motion Control – Measure Very Small Angular Displacements Of Very Small Parts With Low Cost Digital Autocollimator
Motion Control – Miniature Autocollimator
Forestville, CA, Motion Control — The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.
